Take off drone 5 steps

Take off needed at least 9 satellites show on Remote Controller(RC)
起飛需要至少 9 顆衛星顯示在遠端控制器(RC)上
================================================

Take off drone 5 steps:

1. Press the top switch of the drone

2. Turn on the power switch of the RC

3. Push the left rocker upward and then pull down to matching frequency between drone and RC

4. Press the geomagnetic calibration button once the drone indicator lights are blue and red flashing slowly

5. Pick up the drone and make horizontal clockwise rotation 3 laps. You will hear a drop beep in the RC and red & blue lights flash.

Rotate the drone vertically for 3 laps. You will hear a drop beep in the RC and red & blue lights for long time.

(Above 2 steps meaning the calibration complete)

無人機起飛前的 5 個步驟: 

1. 按下無人機上面的開關。

2. 打開 遙控器(RC) 的電源開關。

3. RC的左搖桿向上推,然後向下拉, 如此來匹配無人機和 RC 之間的頻率。

4. 請按(Geomagnetic Calibration button)地磁校準按鈕, 無人機指示燈將呈藍色,紅色緩慢閃爍。

5. 拿起無人機,水平順時針旋轉3圈。您將在 RC 中聽到一滴蜂鳴音, 紅色和藍色指示燈閃爍。 垂直旋轉無人機3圈。你會聽到一滴蜂鳴聲在Rc和紅色和藍色燈很長一段時間。 (以上 2 個步驟表示校準完成)